Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 194 of 1039 2021-09-23
Not Subject to NDA
3.3.5. AT+CLCK - Facility Lock/Unlock
This command is used to lock or unlock a ME on a network facility.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CLCK=<fac>,<mode>[,<password>[,<class>]]
Set command is used to lock, unlock or interrogate a modem or a network
lock facility. Password is normally needed to do such actions
Parameters:
Name
Type
Default
Description
<fac>
string
N/A
facility to lock, unlock or interrogate
Values:
"SC"
:
SIM (PIN request) (device asks SIM password
at power-up and when this lock command
issued)
"FD"
:
SIM fixed dialing memory feature (if PIN2
authentication has not been done during the
current session, PIN2 is required as
<passwd>)
<mode>
integer
N/A
defines the operation to be done on the
facility
Values:
0
:
unlock facility
1
:
lock facility

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English