Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 621 of 1039 2021-09-23
Not Subject to NDA
3.14.11. AT+CGEREP - Packet Domain Event Reporting
This command enables or disables the presentation of unsolicited result codes.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CGEREP=[<mode>[,<bfr>]]
Set command enables/disables sending of unsolicited result codes in case
of certain events occurring in the module or in the network. The URC
formats and related events are shown in the Additional info sections.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
controls the processing of
URCs specified with this
command.
Values:
0
:
buffer unsolicited result codes in the TA. If TA result
code buffer is full, the oldest one can be discarded. No
codes are forwarded to the TE.
1
:
discard unsolicited result codes when TA-TE link is
reserved (e.g. in on-line data mode); otherwise
forward them directly to the TE.
2
:
buffer unsolicited result codes in the TA when TA-TE
link is reserved (e.g. in on-line data mode) and flush
them to the TE when TA-TE link becomes available;
otherwise forward them directly to the TE.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English