Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 171 of 1039 2021-09-23
Not Subject to NDA
3.2.5. Call (Voice and Data) Control
3.2.5.1. ATD - Dialup Connection
This command establishes a GPRS communication between the TE and the external
PDN, or starts a voice call to a given phone number.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
Yes
-
2
ATD
The ATD execution command assumes the format shown in Additional
info section. It causes the MT to perform whatever actions are necessary
to establish communication between the TE and the external PDN or to
start a voice call to a given phone number.
Additional info:
ATD<number>;
Execution command starts a voice call to the phone number given
as parameter.
Name
Type
Default
Description
<number>
mixed
-
phone number to be dialed.
The numbers accepted are 0-9 and
'*', '#', 'A', 'B', 'C', 'D', '+', 'P', ','.
ATD><str>;
issues a call to phone number which corresponding alphanumeric
field is <str>; all available memories will be searched for the
correct entry.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English