Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 208 of 1039 2021-09-23
Not Subject to NDA
3.3.10. AT+CPLS - Selection of Preferred PLMN List
The command is used to select a list of preferred PLMNs in the SIM/USIM card.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CPLS=<list>
Set command select one PLMN selector with Access Technology list in the
SIM card or active application in the UICC (GSM or USIM), that is used by
+CPOL command.
Parameter:
Name
Type
Default
Description
<list>
integer
0
PLMNs list
selector
Values:
0
:
User controlled PLMN selector with Access Technology
EFPLMNwAcT, if not found in the SIM/UICC then PLMN
preferred list EFPLMNsel (this file is only available in
SIM card or GSM application selected in UICC)
1
:
Operator controlled PLMN selector with Access
Technology EFOPLMNwAcT
2
:
HPLMN selector with Access Technology
EFHPLMNwAcT
The value set by command is directly stored in NVM and doesn't
depend on the specific CMUX instance.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English