Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 354 of 1039 2021-09-23
Not Subject to NDA
3.4.22. AT#FIRSTNET - APN Automatic Switch by SIM
This command is the functionality to enable or disable APN automatic switch.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#FIRSTNET=<mode>
This command allows to set APN automatic switch mode by SIM.
Parameter:
Name
Type
Default
Description
<mode>
integer
1
Enable / Disable APN automatic switch by
SIM
Values:
0
:
Disable APN automatic switch by SIM
1
:
Enable APN automatic switch by SIM
This command is for AT&T (fwswitch 0); it allows to view an APN
table for firstnet SIM that is different from showed APN table in
case of a AT&T normal SIM.
AT#FIRSTNET?
Read command reports the current stored parameter:
#FIRSTNET: <mode>
AT#FIRSTNET=?
Test command reports the supported range of values for parameter:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English