Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 835 of 1039 2021-09-23
Not Subject to NDA
3.19.14. AT#SSLSECCFG2 - Configure Additional Parameters of a SSL Socket
This command allows configuring additional SSL security parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLSECCFG2=<SSId>,<version>,<SNI>[,<CustomCA>[,<PreloadedCA>[,<MinVe
rsion>]]]
Parameters:
Name
Type
Default
Description
<SSId>
integer
N/A
Secure Socket Identifier
Value:
1÷10
:
SSL socket ID
<version>
integer
4
select SSL/TLS protocol version
Values:
0÷2
:
protocol version TLSv1.2
3
:
protocol version TLSv1.2
4
:
protocol version TLSv1.3
<SNI>
integer
0
enable/disable Service Name
Indication
Values:
0
:
SNI disabled
1
:
SNI enabled
<CustomCA>
integer
1
mask indicating which CA certificate
is used from AT#SSLSECDATA
Values:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English