Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 944 of 1039 2021-09-23
Not Subject to NDA
3.24.12.14. AT#MQSNSTATE - Set MQTT-SN client state
This command initializes a MQTT-SN client and allocates the necessary resources.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNSTATE=<instanceNumber>,<state>[,<duration>]
Set command changes the MQTT-SN client state to "asleep", "awake" or
"active" state.
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
-
Selects the client instance to
activate or deactivate. The list of
available clients is obtained with
the read command.
Value: 1..<maxClients>
To know maxClients value use
test command.
<state>
integer
N/A
Desired state of the MQTT-SN
client.
Values:
0
:
Active state. This is the normal connected
state in which all the MQTT-SN operations
can be performed. This option is valid only
if client is in asleep state
1
:
Asleep State: Client can enter asleep state
whenever they are not active, and can
become active whenever they have data to
send or to receive. In this state, no MQTT-
SN operation can be performed except
sending keep-alive packets. User has to
specify periodic duration of sleep state.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English