Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 899 of 1039 2021-09-23
Not Subject to NDA
3.24.6. AT#MQWCFG - Configure MQTT Last Will and Testament
This command sets Last Will and Testament for the selected MQTT client.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQWCFG=<instanceNumber>,<willFlag>[,<willRetain>,<willQos>,<willTopic>,
<willMsg>]
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. To know
maxClients value use test
command
<willFlag>
integer
0
selects whether the client needs
to specify a Last Will and
Testament. If set to 0, this is the
last parameter to be set.
Values:
0
:
the client does not need to specify a Last
Will and Testament
1
:
the client needs to specify a Last Will and
Testament
<willRetain>
integer
0
selects whether the Last Will
message needs to be retained by
the server

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English