Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 199 of 1039 2021-09-23
Not Subject to NDA
3.3.7. AT+CLIR - Calling Line Identification Restriction
The command manages the CLIR service.
3GPP TS 27.007
3GPP TS 22.081
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CLIR=[<n>]
Set command overrides the CLIR subscription when temporary mode is
provisioned as a default adjustment for all following outgoing calls. This
adjustment can be revoked by using the opposite command. This
command refers to CLIR service that allows a calling subscriber to enable
or disable the presentation of the Calling Line Identification to the called
party when originating a call.
Parameter:
Name
Type
Default
Description
<n>
integer
0
setting of CLIR service
Values:
0
:
CLIR facility according to CLIR service network status
1
:
CLIR facility active (CLI not sent)
2
:
CLIR facility not active (CLI sent)
This command sets the default behavior of the device in all
outgoing calls.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English