Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 551 of 1039 2021-09-23
Not Subject to NDA
3.10.13. AT#TEMPMON - Temperature Monitor
This command is used to retrieve internal temperature information of the module.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TEMPMON=<mod>[,<urcMode>[,<action>[,<hystTime>[,<GPIO>]]]]
Set command sets the internal temperature monitoring mode of the
module, reads it, and enables/disables/triggers the presentation of the
temperature monitoring message, that can be respectively an URC or an
intermediate message according to the selected mode.
#TEMPMEAS: <level>,<value>
The temperature monitoring message parameters are described in the
Unsolicited fields section.
Parameters:
Name
Type
Default
Description
<mod>
integer
0
select the temperature monitoring
mode.
Values:
0
:
only if <mod>=0 optional parameters of the
command have meaning
1
:
triggers the measurement of the module internal
temperature, reporting the result using the format
shown above
<urcMode>
integer
0
URC presentation mode

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English