Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 552 of 1039 2021-09-23
Not Subject to NDA
Values:
0
:
disables the presentation of the temperature
monitoring URC.
1
:
enables the presentation of the temperature
monitoring URC, whenever the module internal
temperature reaches either operating or extreme
levels.
<action>
integer
0
sum of integers, each representing
the action to be done whenever the
module internal temperature
reaches either operating or
extreme levels.
Values:
0
:
no action
1
:
(01) activating of thermal mitigation according to
thermal configuration file, see #TEMPCFG
command
2
:
(10) output pin <GPIO> is tied HIGH when
operating temperature bounds are reached;
when the temperature is back to normal the
output pin <GPIO> is tied LOW. If this <action> is
required, it is mandatory to set the <GPIO>
parameter too
3
:
(11) this value contains <action=1> and
<action=2>, i.e. activate thermal mitigation and a
GPIO indication. If this <action> is required, it is
mandatory to set the <GPIO> parameter too.
4
:
same as 2
5÷7
:
same as 3
<hystTime>
integer
-
dummy parameter in the range
0..255
<GPIO>
integer
-
GPIO number. Valid range is any
GPIO pin as described in #GPIO

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English