Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 56 of 1039 2021-09-23
Not Subject to NDA
3.2.2.5. AT&P - Default Reset Full Profile Designation
Define which full profile is loaded at startup.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT&P[<n>]
Execution command defines which full profile will be loaded at startup.
Parameter:
Name
Type
Default
Description
<n>
integer
0
Configuration parameter
Value:
0,1
:
profile number: the wireless module can store 2 full
configurations (see command &W).
Differently from command Z<n>, which loads just once the desired
profile, the one chosen through command &P will be loaded at
every startup.
If parameter is omitted, the command has the same behavior as
AT&P0

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English