Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 762 of 1039 2021-09-23
Not Subject to NDA
SMTP
3.17.1. AT#ESMTP - E-mail SMTP Server
This command allows to set the SMTP server address for e-mail sending.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ESMTP=<smtp>
Set command sets the SMTP server address, used for sending e-mails.
SMTP server can be specified as IP address or as nick name.
Parameter:
Name
Type
Default
Description
<smtp>
string
-
SMTP server address. This parameter can be
either:
62. any valid IP address in the format:
"xxx.xxx.xxx.xxx"
63. any host name to be solved with a DNS
query in the format: <host name>
(factory default is the empty string "").
The SMTP server used shall be inside the APN space (the SMTP
server provided by the network operator) or it must allow the relay,
otherwise the command will refuse to send the e-mail.
AT#ESMTP?
Read Command reports the current SMTP server address, in the format:
#ESMTP: <smtp>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English