Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 761 of 1039 2021-09-23
Not Subject to NDA
0
:
disable FTPS security: all FTP commands will
perform plain FTP connections.
1
:
enable FTPS security
<FTPext>
integer
1
PORT/PASV and EPRT/EPSV
commands.
Option added to pass-through
firewall that is unaware of the
extended FTP commands for
#FTPPUT, #FTPLIST, #FTPAPP,
#FTPGET.
Values:
0
:
always use EPRT and EPSV commands
1
:
if both module and server ipv4 use PORT and
PASV commands
If parameter <tout> is omitted the behavior of set command is the
same as read command.
AT#FTPCFG?
Read command reports the currently selected parameters in the format:
#FTPCFG: <tout>,<IPPignoring>,<FTPSEn>,<FTPext>
AT#FTPCFG=?
Test command reports the supported range of values for parameter(s):
<tout>, <IPPignoring>, <FTPSEn>, and <FTPext>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English