Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 53 of 1039 2021-09-23
Not Subject to NDA
3.2.2.2. AT&F - Set to Factory-Defined Configuration
Set configuration parameters to default values.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT&F[<value>]
Execution command sets the configuration parameters to default values
specified by manufacturer; it takes in consideration hardware
configuration switches and other manufacturer-defined criteria.
Parameter:
Name
Type
Default
Description
<value>
integer
0
parameters to reset
Values:
0
:
only the factory profile base section parameters are
considered
1
:
either the factory profile base section and the
extended section are considered (full factory profile)
If parameter <value> is omitted, the command has the same
behavior as AT&F0.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English