Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 722 of 1039 2021-09-23
Not Subject to NDA
3.15.34. AT#NTPCFG - Configure NTP Parameters
This set command allows to configure additional parameters to be used for NTP
operations.
[1] Standard RFC5905
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#NTPCFG=<cid>[,<authType>,<KeyId>,<keysFilePath>]
Parameters:
Name
Type
Default
Description
<cid>
integer
-
context id used to perform NTP
operations. Refer to test command
to know the supported range of
values.
<authType>
integer
0
authentication type to be used with
NTP server
Values:
0
:
do not authenticate server
1
:
use symmetric key to authenticate server (see
standard [1]), using <KeyId> and
<KeysFilePath> to retrieve the required
parameters
<KeyId>
integer
-
if <authType> is 1, it provides the key
Id to authenticate the server
<keysFilePath>
string
-
if <authType> is 1, it provides the
absolute path of the file where the

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English