Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 348 of 1039 2021-09-23
Not Subject to NDA
3.4.19. AT#SIMINCFG - SIMIN Pin Configuration
This command allows to configure a GPIO pin as SIMIN pin (detect switch of SIM holder)
and the polarity of the SIMIN pin.
[1] Telit Hardware Design Guide of the used module
[2] SIM Integration Design Guide, 80000NT10001A
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SIMINCFG=<GPIOPin>,<siminDetMode>
Set command allows to configure either a General Purpose I/O pin (GPIO)
as SIMIN pin to detect the SIM presence, and its status according to the
used SIM holder. Refer to document [1] to have information on the GPIO
pins, see also document [2].
Parameters:
Name
Type
Default
Description
<GPIOPin>
integer
0
number of the GPIO pin used as
SIMIN pin. The GPIO pin range
starts from 1; 0 is used to reset
#SIMINCFG settings, it is the
default value.
0 is the only value allowed for
ME910G1 family
Value:
0
:
reset #SIMINCFG settings
<siminDetMode>
integer
0
status of SIMIN pin for SIM
detection
Values:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English