Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 643 of 1039 2021-09-23
Not Subject to NDA
3.15.4. AT#SGACTCFGEXT - Extended PDP Context Configuration
This command manages the extended configuration of context activation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SGACTCFGEXT=<cid>,<abortAttemptEnable>[,<unused>[,<unused>[,<unused>
]]]
Set command is used to enable new features related to context activation.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identifier. To
know the range see
+CGDCONT command.
<abortAttemptEnable>
integer
0
enables/disables abort
during context activation
attempt.
Values:
0
:
old behavior: no abort possible while
attempting context activation
1
:
abort during context activation attempt
is possible by sending a byte on the
serial port
<unused>
mixed
N/A
unused parameter
Value:
0
:
dummy value
<unused>
mixed
N/A
unused parameter
Value:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English