Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 313 of 1039 2021-09-23
Not Subject to NDA
SIM
3.4.1. AT+CPIN - Enter the PIN
The command sends to the device a password which is necessary before it can be
operated.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT+CPIN=<pin>[,<newpin>]
Set command sends to the device a password which is necessary before it
can be operated (SIM PIN, SIM PUK, PH-SIM PIN, etc.).
If the PIN required is SIM PUK or SIM PUK2, the <newpin> is required.
This <newpin>, will replace the old pin in the SIM.
The command may be used to change the SIM PIN by sending it with both
parameters <pin> and <newpin>.
Parameters:
Name
Type
Default
Description
<pin>
string
-
PIN required or old PIN if the command is
used to change the SIM PIN
<newpin>
string
-
new PIN that will replace old pin
AT+CPIN?
Read command reports the PIN/PUK/PUK2 request status of the device in
the form:
+CPIN: <code>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English