Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 591 of 1039 2021-09-23
Not Subject to NDA
Jamming Detection and Report
3.13.1. AT#JDRENH2 - Enhanced Jamming Detection and Report
This command enables/disable jamming detection, and reports the relative result to the
user.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#JDRENH2=<mode>[,<sat2G>,<unused>,<carrNum2G>,<pRxLevT2G>,<unused
>, <unused>,<unused>[,<P_RSSI_T4G>[,<P_RSRQ_T4G>[,<unused>]]]]
The set command performs the following activities:
45. enables/disables the detection of the presence of jamming in the module
coverage.
46. selects one of the following two reports mode or both: on dedicated GPIO,
by means of the URC, or GPIO + URC.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
enable/disable jamming detection
and select reporting mode
Values:
0
:
disable jamming detection
1
:
enable jamming detection, and report its
condition on a GPIO pin, see Additional info
section

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English