Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 568 of 1039 2021-09-23
Not Subject to NDA
3.11.5. AT#FASTSHDN - Fast Shutdown Configuration
This command can be used as a set command to configure a GPIO pin performing a fast
shutdown when on it is forced a High to Low level transition. Or can be used as an
execute command to force immediately a fast shutdown.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#FASTSHDN[=<enable>[,<GPIO>]]
Parameters:
Name
Type
Default
Description
<enable>
integer
0
enable/disable the fast shutdown
execution via a GPIO pin.
Values:
0
:
disabled
1
:
enabled
<GPIO>
integer
-
selects the GPIO to execute the fast
shutdown. When the selected <GPIO> pin
goes from High to Low level and the
<enable> is set to 1, the module execute
immediately the fast shutdown.
Additional info:
The execution command #FASTSHDN<CR><LF> forces the module
to execute immediately the fast shutdown.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English