Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 567 of 1039 2021-09-23
Not Subject to NDA
0
:
DTR has no effect on module turned
OFF by #SYSHALT
1
:
DTR transition from low to high
turns on again the module turned off
by #SYSHALT command
<RebootEn>
integer
1
select how the
module exits
SYSHALT
Values:
0
:
module exits from SYSHALT and
stays in detached mode like CFUN=4
status. To restore normal behavior,
the user shall set CFUN=1
1
:
module exits from SYHALT
performing a total reboot
The parameters are not settable.
AT#SYSHALT=?
Test command returns the supported range of parameters values in the
format:
# SYSHALT: (0-1),(0-1),(0-1)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English