Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 49 of 1039 2021-09-23
Not Subject to NDA
General Control and Config
3.2.1. Command Line Prefixes
3.2.1.1. AT - Starting a Command Line
AT is the prefix used to start a command line.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT
The prefix AT is a two-character abbreviation ("ATtention"), always used
to start a command line to be sent from TE to TA, with the only exception
of AT#/ prefix. As a command, it can be issued just to test if the device is
responding to AT commands.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English