Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 791 of 1039 2021-09-23
Not Subject to NDA
SSL
3.19.1. AT#SSLCFG - Configure General Parameters of a SSL Socket
This command configures SSL connection parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SSLCFG=<SSId>,<cid>,<pktSz>,<maxTo>,<defTo>,<txTo>[,<SSLSRingMode>
[,<noCarrierMode>[,<skipHostMismatch>[,<equalizeTX> [,<connTo
>[,<Unused1>]]]]]]
Set command allows configuring SSL connection parameters.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now SSL block manages only one
socket
<cid>
integer
-
PDP context identifier, see
+CGDCONT command.
<pktSz>
integer
0
packet size to be used by the
SSL/TCP/IP stack for data
sending
Values:
0
:
select automatically default value
(300)
1÷1500
:
number of bytes
<maxTo>
integer
90
exchange timeout or socket
inactivity timeout. In online
mode, if there is no data

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English