Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 677 of 1039 2021-09-23
Not Subject to NDA
3.15.17. AT#SRECV - Socket Receive Data in Command Mode
The command permits the user to read data arrived through a connected socket when
the module is in command mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SRECV=<connId>,<maxByte>[,<UDPInfo>]
Execution command permits the user to read data arrived through a
connected socket but buffered and not yet read because the module
entered command mode before reading them; the module is notified of
these data by a SRING: URC, whose presentation format depends on the
last #SCFGEXT setting.
Parameters:
Name
Type
Default
Description
<connId>
integer
NA
socket connection identifier
Value:
1÷conMax
:
socket connection identifier. conMax value
is returned by test command
<maxByte>
integer
NA
max number of bytes to read
Value:
1÷1500
:
max number of bytes to read
<UDPInfo>
integer
0
enables/disables the visualization of
UDP datagram information.
Values:
0
:
UDP information disabled
1
:
UDP information enabled, see Additional info
section.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English