ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 625 of 1039 2021-09-23
3.14.13. AT+CGREG - GPRS Network Registration Status
Set command controls the presentation of the +CGREG: unsolicited result code
3GPP TS 27.007
3GPP TS 24.008
AT+CGREG=[<mode>]
Set command enables/disables the +CGREG: unsolicited result code, and selects
one of the available formats:
short format:
+CGREG:<stat>
long format:
+CGREG:<stat>[,<lac>,<ci>[,<AcT>,<rac>]]
extra long format:
+CGREG:<stat>[,[<lac>],[<ci>],[<AcT>],[<rac>][,,[,[<ActiveTime>],[<PeriodicRAU>],
[<GPRSREADYtimer>]]]]
Parameter:
enables/disables the network registration
unsolicited result code (URC), and selects
one of the available formats.
The following events triggers the URC:
51. URC short format is displayed every
time there is a change in the network
registration status