Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 826 of 1039 2021-09-23
Not Subject to NDA
3.19.12. AT#SSLSENDEXT - Send Data through a SSL Socket in Command Mode
This command sends data through a secure socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SSLSENDEXT=<SSId>,<bytestosend>[,<Timeout>]
Execution command sends data through a secure socket.
After command line is terminated with <CR>, the command returns the
following four-character sequence prompt:
<CR><LF><greater_than><space> (see IRA 13, 10, 62, 32)
and waits for the data to be send.
When <bytestosend> bytes have been sent, the sending is automatically
completed. If data are successfully sent, the command returns OK. If data
sending fails, an error code is reported.
Parameters:
Name
Type
Default
Description
<SSId>
integer
N/A
Secure Socket Identifier
Value:
1
:
only one SSL socket is available.
<bytestosend>
string
-
number of bytes to be sent. Refer to
test command for range
<Timeout>
integer
100
time-out in 100 ms units.
Value:
1÷1500
:
hundreds of ms.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English