Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 633 of 1039 2021-09-23
Not Subject to NDA
3.14.16. AT+CRTDCP - Reporting of Terminating Data Via the Control Plane
The set command is used to enable and disable reporting of data from the network to
the MT that is transmitted via the control plane in downlink direction.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CRTDCP=[<reporting>]
If reporting is enabled, the MT returns the following unsolicited result
code when data is received from the network.
+CRTDCP: <cid>,<cpdataLength>,<cpdata>
Parameter:
Name
Type
Default
Description
<reporting>
integer
0
controlling reporting of mobile
terminated control plane data events
Values:
0
:
disable reporting of MT control plane data
1
:
enable reporting of MT control plane data by the
unsolicited result code +CRTDCP
Unsolicited fields:
Name
Type
Description
<cid>
integer
specifies a particular PDP context or EPS
bearer context definition. The <cid>
parameter is local to the TE-MT interface
and identifies the PDP or EPS bearer
contexts which have been setup via AT
command (see the +CGDCONT and
+CGDSCONT commands)
<cpdataLength>
integer
indicates the number of octets of the
<cpdata> information element

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English