Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 232 of 1039 2021-09-23
Not Subject to NDA
3.3.21. AT#ATUNERSEL - Select Antenna Tuner
This command allows to select the antenna tuner driver.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ATUNERSEL=<driver>
Set command selects the antenna tuner driver.
Parameter:
Name
Type
Default
Description
<driver>
integer
0
Identifies one of the possible
antenna tuner driver.
Values:
0
:
GPIO with fixed configuration (default) - 2 I/O to select
4 output bands status combination. (See table in
Additional info).
1
:
MIPI with QAT3516 + AE910 Antenna Tuner Product .
See #BNDTUNER command for further details about
antenna tuner configuration.
Additional info:
Table for <driver> = 1
GRFC1
GRFC2
Band (Uplink)
Freq. Range
(MHz)
0
0
B1, B2, B3, B4,
B25, B66,
GSM1800,
GSM1900
1710-2200
0
1
B8,
EGSM900
880-960

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English