Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 37 of 1039 2021-09-23
Not Subject to NDA
1. result code s that inform about the progress of the TA operation (e.g. connection
establishment CONNECT)
2. result code s that indicate the occurrence of an event not directly associated with
the issuance of a command from TE (e.g. ring indication RING).
Here the basic result codes according to ITU-T V25Ter recommendation
Numeric form
Verbose form
0
OK
1
CONNECT or CONNECT <text>3F3F
2
RING
3
NO CARRIER
4
ERROR
6
NO DIALTONE
7
BUSY
8
NO ANSWER
10
CONNECT 24004
11
CONNECT 48004
12
CONNECT 96004
15
CONNECT 144004
23
CONNECT 1200/754
Table 4:
Note: <text> can be"300", "1200", "2400", "4800", "9600", "14400" or
"1200/75"
2.2.4. Command Response Time-Out
Every command issued to the Telit modules returns a result response, if response codes
are enabled (default). The time required to process the given command and return the
response varies, depending on the command type. The Commands that do not interact
with the SIM or the network, and only involve internal setups or readings, have an
immediate response. The Commands that interact with the SIM or the network may take
several seconds to send a response, depending on the SIM configuration (for example,

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English