Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 207 of 1039 2021-09-23
Not Subject to NDA
AT+CPOL?
Read command returns all used entries from the UICC list of preferred
operators.
AT+CPOL=?
Test command returns the <index> range supported by the UICC and the
range for the <format> parameter.
Entry 3 in the preferred list of the operators is deleted.
AT+CPOL=3
OK
Operator identifier 22603 is inserted in the next free location of the list.
AT+CPOL=,2,22603
OK
Format of <oper> in the read command is changed (only 2 is allowed up to
now).
AT+CPOL=,2
OK
Operator Identifier 22603 is inserted in the 4th position of the list.
AT+CPOL=4,2,22603
OK
Available range for <index> is 1 to 20, for <format>= 2.
AT+CPOL=?
+CPOL: (1-20),(2)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English