Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 241 of 1039 2021-09-23
Not Subject to NDA
2
:
enable the short URC of the channels codecs
information only if the codec changes, see info
section
Additional info:
<mode>=1, the URC of the channels codecs information is displayed
according to the <format> parameter value:
if <format>=0, the URC is:
#CODECINFO: <codec_used>,<codec_set>
if <format>=1, the URC is:
#CODECINFO:
<codec_used>,<codec_set1>[,<codec_set2>[..[,codec_setn]]]
<mode>=2 the short URC of the channels codecs information is
displayed as shown below:
#CODECINFO: <codec_used>
The <codec_used> format dependes on the <format> parameter
value.
Execution command (AT#CODECINFO<CR>) returns immediately
channels codecs information according to the previous setting of
<format> parameter.
if <format>=0, the return message is:
#CODECINFO: <codec_used>,<codec_set>
if <format>=1, the return message is:
#CODECINFO:
<codec_used>,<codec_set1>[,<codec_set2>[..[,codec_setn]]]
The parameters and their format is described in the Unsolicited
code values section.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English