Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 156 of 1039 2021-09-23
Not Subject to NDA
115200
:
bps
230400
:
bps
460800
:
bps
921600
:
bps
AT+IPR?
Read command returns the current value of <rate> parameter.
AT+IPR=?
Test command returns the list of <rate> values in the format:
+IPR: (list of <rate> values)
This command has no effect if it is sent on USB interface or CMUX
instances: the DCE sends the OK result but the settings are ignored.
Test command example
AT+IPR=?
+IPR:
(300,600,1200,2400,4800,9600,19200,38400,57600,115200,230400,460800,921600)
OK

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English