Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 235 of 1039 2021-09-23
Not Subject to NDA
<TuneCode>
string
-
String containing Hex Value used to
configure the antenna tuner. Size of
the string and constraints depend on
specific tuner (see Additional info)
<Unused1>
integer
-
Reserved for future use
<Unused2>
integer
-
Reserved for future use
<Unused3>
integer
-
Reserved for future use
Additional info:
TuneCode configuration:
QAT3516: it requires a 4-char string which contains 2 byte value in HEX
format (i.e.: "E1080")
Following QAT3516 constraints, the string has this general representation:
"xx8y" where:
Value x can assume any Hex value from 0 to F
Value y can assume only value from 0 to 3
AT#BNDTUNER?
Read command reports the current settings of parameters, in the format:
#BNDTUNER: <Band>,<DeviceId>,<TuneCode>
#BNDTUNER: <Band>,<DeviceId>,<TuneCode>
#BNDTUNER: <Band>,<DeviceId>,<TuneCode>
...
AT#BNDTUNER=?
Test command reports the supported range of the parameters' values

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English