Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 272 of 1039 2021-09-23
Not Subject to NDA
<AcTtype>
integer
N/A
type of access technology.
Values:
0
:
Access technology is not using eDRX. This
parameter value is only used in the unsolicited
result code, it cannot be used in the set
command.
2
:
GSM (A/Gb mode)
4
:
E-UTRAN (CAT M1 mode)
5
:
E-UTRAN (NB1 mode)
<Req_eDRX>
string
-
half a byte in a 4-bit format. The eDRX
value refers to bit 4 to 1 of octet 3 of
the Extended DRX parameters
information element (see subclause
10.5.5.32 of 3GPP TS 24.008). For the
coding and the value range, see
Extended DRX parameters information
element in 3GPP TS 24.008, Table
10.5.5.32/3GPP TS 24.008. Default
value is "0000".
Additional info:
If <mode>=2 and there is a change in the eDRX parameters provided
by the network, the unsolicited result code reports:
+CEDRXS:
<AcTtype>[,<Req_eDRX>[,<NW_prove_DRX>[,<PagTimeWindow>]]]
Name
Type
Default
Description
<NW_prove_DRX>
string
-
half a byte in a 4-bit format.
The eDRX value refers to
bit 4 to 1 of octet 3 of the
Extended DRX parameters
information element (see
subclause 10.5.5.32 of

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English