Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 289 of 1039 2021-09-23
Not Subject to NDA
3
:
disable the use of eDRX and discard all
parameters for eDRX or, if available,
reset to the manufacturer specific
default values
<AcTtype>
integer
N/A
type of access technology.
Values:
0
:
Access technology is not using eDRX.
This parameter value is only used in
the unsolicited result code, it cannot be
used in the set command.
2
:
GSM (A/Gb mode)
4
:
E-UTRAN (CAT M1 mode)
5
:
E-UTRAN (NB1 mode)
<Req_eDRX>
string
-
half a byte in a 4 bit format.
The eDRX value refers to bit-
4 to 1 of octet 3 of the
Extended DRX parameters
information element (see
subclause 10.5.5.32 of 3GPP
TS 24.008). For the coding
and the value range, see
Extended DRX parameters
information element in 3GPP
TS 24.008, Table
10.5.5.32/3GPP TS 24.008.
Default value is "0000"
<ReqPagTimeWindow>
string
-
half a byte in a 4-bit format.
The paging time window
refers to bit 8 to 5 of octet 3
of the Extended DRX
parameters information
element (see subclause
10.5.5.32 of 3GPP TS 24.008).
For the coding and the value
range, see the Extended DRX
parameters information

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English