Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 297 of 1039 2021-09-23
Not Subject to NDA
TA: <timadv> reported only for the serving cell.
When AT#MONI=7 is the last setting entered, the execution
command AT#MONI<CR> reports the information previously listed
for each of the cells in the neighbor of the serving cell. The
information is formatting in a sequence of <CR><LF>-terminated
strings.
The timing advance value is meaningful only during calls or
GPRS/LTE transfers active.
AT#MONI=?
Test command reports the maximum number of cells, in a neighbor of the
serving cell excluding it, from which we can extract GSM/LTE related
information, along with the ordinal number of the current selected cell, in
the format:
#MONI: (<MaxCellNo>,<CellSet>)
Additional info:
Parameters meaning.
Name
Type
Default
Description
<MaxCellNo>
integer
-
maximum number of cells in a
neighbor of the serving cell and
excluding it from which we can
extract GSM/LTE related
information. This value is
always 6.
<CellSet>
integer
-
last setting done with command
#MONI.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English