ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 343 of 1039 2021-09-23
#VSIMSETPROF=1 returns immediate ERROR in case SIM profile is
missing (i.e. #SECT, #SECP operations has not been performed
yet )
#VSIMSETPROF=0 returns immediate ERROR in case physical SIM
is missing
Expect 3 - 4 seconds delay when SIM switch is performed in warm
status (module already running) from physical SIM, 2 seconds from
Virtual SIM
If request is performed immediately after AT parser availability, it
can require 3 seconds more. If first response is ERROR please
retry, it could be due to booting process. To avoid that, send a TEST
command before
AT#VSIMSETPROF?
Read command reports the current value of parameter in the format:
#VSIMSETPROF: <profId>
A special value of 255 indicates that the physical SIM is selected, but a SIM
is not inserted
AT#VSIMSETPROF=?
Test command reports the supported range of values for the input
parameter.
To Next Page
Loading...
Need help?
General
