Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 361 of 1039 2021-09-23
Not Subject to NDA
150
:
SMS control response
160
:
call/SS/USSD response
<Result>
integer
identify the result of the Call or SMS control
performed by SIM/USIM device
Values:
0
:
Call/SMS not allowed
1
:
Call/SMS allowed
2
:
Call/SMS allowed with modification
<alphaIdentifier>
string
optional text provided by the SIM/USIM
device in ASCII format
<Number>
string
Called number, Service Center Address or
SS String in ASCII format
<MODestAddr>
string
MO destination address in ASCII format
The settings are saved on user profile and available on following reboot.
SIM/USIM Toolkit activation/deactivation is only performed at power on
according to the saved setting.
If AT#ENS=1, the <mode> parameter is set to 2.
Just one instance at a time, the one which first issued AT#STIA=<mode>
(with <mode> not equal to 0), is allowed to issue SAT/USAT commands,
and this is valid till the same instance issues AT#STIA=0. After reboot,
SAT/USAT can be used on another instance.
AT#STIA?
Read command can be used to get information about the SAT/USAT interface. The
message format is:
#STIA: <state>,<mode>,<timeout>,<SatProfile>
Additional info:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English