ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 366 of 1039 2021-09-23
<cmdType>=16 (SET UP CALL proactive command)
#STGI response format:
#STGI: 16,<cmdDetails>,[<confirmationText>],<calledNumber>
identifies the command
details
set up call, but only if not currently
busy on another call
set up call, but only if not currently
busy on another call, with redial
set up call, putting all other calls (if
any) on hold
set up call, putting all other calls (if
any) on hold, with redial
set up call, disconnecting all other calls
(if any)
set up call, disconnecting all other calls
(if any), with redial
string for user
confirmation stage
string containing called
numbers
This section is dedicated to the following proactive commands: