EasyManuals Logo

Telit Wireless Solutions ML865G1 Reference Guide

Telit Wireless Solutions ML865G1
1039 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #402 background imageLoading...
Page #402 background image
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 402 of 1039 2021-09-23
Not Subject to NDA
Acknowledge for the received SMS-DELIVER SM is sent to network immediately
when +CSMS <service> is set to '0' or when +CSMS <service> is set to
'1', acknowledge is sent via +CNMA command during predefine time-out, an
error is sent to network in case timeout expire, next +CMT response is depend
on acknowledge of current received +CMT response in case +CSMS <service>
parameter set to '1'.
<bm>=2:
PDU mode
+CBM: <length><CR><LF><PDU>
Text mode
+CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data>
<ds>=1:
PDU mode
+CDS: <length><CR><LF><PDU>
TEXT mode
+CDS: <fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>
Acknowledge for the received SMS-STATUS-REPORT SM is sent to network
immediately when +CSMS <service> is set to '0' or when +CSMS <service> is set
to '1', acknowledge is sent via +CNMA command during pre-defined timeout, an
error is sent to network in case timeout expire, next +CDS response is depend
on acknowledge of current received +CDS response in case +CSMS <service>
parameter set to '1'.
<ds>=2:

Table of Contents

Other manuals for Telit Wireless Solutions ML865G1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telit Wireless Solutions ML865G1 and is the answer not in the manual?

Telit Wireless Solutions ML865G1 Specifications

General IconGeneral
BrandTelit Wireless Solutions
ModelML865G1
CategoryWireless modules
LanguageEnglish

Related product manuals