Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 434 of 1039 2021-09-23
Not Subject to NDA
"REC
UNREAD"
:
new received message unread
"REC READ"
:
received message read
"STO UNSENT"
:
message stored not yet sent
(default)
"STO SENT"
:
message stored already sent
Unsolicited field:
Name
Type
Description
<index>
integer
message location index in the memory <memw>
(see +CPMS). If message storing fails for some
reason, an error code is reported.
The DCD signal shall be in ON state while <data> is entered. The
echoing of <data> is controlled by echo command E.
In PDU mode, not only SUBMIT messages can be stored in SIM,
but also DELIVER and STATUS REPORT messages (3GPP TS
23.040 SMS-STATUS-REPORT messages). SUBMIT messages can
only be stored with status 2 or 3; DELIVER and STATUS REPORT
messages can only be stored with status 0 or 1.
Care must be taken to ensure that during the command
execution, which may take several seconds, no other SIM
interacting commands are issued.
It is possible to save a concatenation of at most 10 SMs; the
maximum number of chars depends on <dcs>:
12. 2448 chars
13. 2144 chars if 8-bit is used
14. 1072 chars if UCS2 is used
In text mode, not only SUBMIT messages can be stored in SIM,
but also DELIVER messages.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English