Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 465 of 1039 2021-09-23
Not Subject to NDA
specified by command Select TE
Character Set +CSCS
<adnumber>
string
-
additional number; string type phone
number of format <adtype>
<adtype>
integer
-
type of address octet
<secondtext>
string
-
string type field of maximum length
<slength> indicating a second text
field associated with the number;
character set as specified by
command Select TE Character Set
+CSCS
<email>
string
-
field of maximum length <elength>
indicating an email address; character
set as specified by command Select TE
Character Set +CSCS
<hidden>
integer
0
indicates if the entry is hidden or not
Values:
0
:
phonebook entry not hidden
1
:
phonebook entry hidden
If record number <index> already exists, it will be overwritten.
If either <number>, <type> and <text> are omitted, the phonebook entry in
location <index> is deleted.
If either "LD", "MC" or "RC" memory storage has been selected (see
+CPBS) it is possible just to delete the phonebook entry in location
<index>, therefore parameters <number>, <type> and <text> must be
omitted.
Before defining <group> string, it is recommended to check, with
#CPBGR command, the predefined group names, that could be already
stored in USIM in Grouping information Alpha String (GAS) file. If all
records in such file are already occupied, +CPBW command will return
ERROR when trying to use a new group name that is not in the predefined
GAS names. To define a new custom group string, it is necessary to

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English