Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 556 of 1039 2021-09-23
Not Subject to NDA
CH2G command must be followed by the <ch>
channel and <band> band:
AT#TESTMODE="CH2G 100 1"
Values:
"TM"
:
forces the module in Test Mode and
reboot module
"OM"
:
forces the module in Operative Mode
and reboot module
“INIT4G”
:
4G command: initialize Radio for 4G
transmission
"CH4G earfcn bw"
:
4G command: set the earfcn UL or DL
channel for transmitting and receiving
and set the bandwidth
"PL4G pwr"
:
4G command: change the transmission
power. Range is: -400 ÷ 200 in tenths
of dBm
“TX4G"
:
4G command: starts the non-stop
module transmission
"RL4G"
:
4G command: reads Rx power level.
The value read is in tenths of dBm
"DEINIT4G"
:
4G command: de-initialize Radio for 4G
transmission and reboot module
“INIT2G”
:
2G command: initialize Radio for 2G
transmission
“CH2G ch band”
:
2G command: set the channel and
band
"PL2G pwr"
:
2G command: change the transmission
power. Range is: -400 ÷ 330 in tenths
of dBm

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English