Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 564 of 1039 2021-09-23
Not Subject to NDA
AT#ENHRST?
Read command reports the current parameter settings in the following
format:
#EHNRST: <mode>[,<delay>,<remainingTime>]
Additional info:
Read command parameter for <mode> =1 or 2.
Name
Type
Default
Description
<remainingTime>
integer
-
time in minutes remaining
before next reset
AT#ENHRST=?
Test command reports supported range of values for parameters <mode>
and <delay>.
Example of #ENHRST usage and expected unit behavior.
•
AT#ENHRST=1,60
...
Module reboots after 60 minutes
•
AT#ENHRST=1,0
Module reboots immediately
•
AT#ENHRST=2,40
...
Module reboots after 40 minutes, and after every following power on,
it will continue to reboot always after 40 minutes.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English