Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 573 of 1039 2021-09-23
Not Subject to NDA
If <mode>=2 the command returns the following report:
#DGSTAT: <TimeStamp>, <SMSAttemptedFlag>
If no report is present the result is:
#DGSTAT: 0,0
Any additional parameter will report an error.
Name
Type
Default
Description
<TimeStamp>
string
-
timestamp of the last time
power loss was detected and
Dying Gasp feature was
triggered.
<SMSAttemptedFlag>
integer
N/A
indicates whether device
attempted to send message (by
SMS, IP or both) in the last
power loss event, does not
guarantee network delivery.
Values:
0
:
message not attempted
1
:
message attempted
If <URC>=1 the module returns the following unsolicited message in the
format:
#DGEN: <GPIO>, <text>
If parameter <Action>=0, not activated:
#DGEN: <GPIO>
Full configuration is stored in NVM.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English