Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 601 of 1039 2021-09-23
Not Subject to NDA
1
:
PDP header compression on
2
:
RFC1144 (applicable only for products
supporting GSM; applicable for SNDCP
only)
3
:
RFC2507 (applicable only for products
supporting GSM)
4
:
RFC3095 (applicable only for products
supporting GSM; applicable for PDCP
only)
<IPv4AddrAlloc>
integer
0
a numeric parameter that
controls how the MT/TA
requests to get the IPv4
address information.
Value:
0
:
IPv4 Address Allocation through NAS
Signaling (default)
<emergencyIndication>
integer
0
a numeric parameter used
to indicate whether the PDP
context is for emergency
bearer services or not.
Value:
0
:
PDP context is not for emergency
bearer services (default)
To erase all params for a <cid> give as follows:
AT+CGDCONT=<cid>,<pdp_type>,""
AT+CGDCONT?
Read command returns the current settings for each defined context in the format:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English