Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 623 of 1039 2021-09-23
Not Subject to NDA
Here are some examples:
•
A network request for PDP context activation occurred when the TA
was unable to report it to the TE with a +CRING unsolicited result
code and was automatically rejected.
+CGEV: REJECT <PDP_type>, <PDP_addr>
•
The network has requested a context reactivation. The <cid> that
was used to reactivate the context is provided if known to TA.
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
•
The network has forced a context deactivation. The <cid> that was
used to activate the context is provided if known to TA.
+CGEV: NW_DEACT <PDP_type>, <PDP_addr>, [<cid>]
•
The mobile equipment has forced a context deactivation. The <cid>
that was used to activate the context is provided if known to TA.
+CGEV: ME DEACT <PDP_type>, <PDP_addr>, [<cid>]
•
The mobile equipment has forced a PS detach. This implies that all
active contexts have been deactivated. These are not reported
separately.
+CGEV: ME_DETACH
•
The network has forced a PS detach. This implies that all active
contexts have been deactivated. These are not reported separately.
+CGEV: NW_DETACH

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English