Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 793 of 1039 2021-09-23
Not Subject to NDA
Values:
0
:
NO CARRIER without additional
information
1
:
NO CARRIER:SSL,<SSId> See Additional
info section
2
:
NO CARRIER:SSL,<SSId>,<cause> See
Additional info section
<skipHostMismatch>
integer
1
enables/disables Host
Mismatch alert
Values:
0
:
do not ignore
1
:
ignore
<equalizeTX>
integer
0
enable/disable equalized data
transmission
Values:
0
:
disable equalized data transmission
1
:
enable equalized data transmission, i.e.:
after successful data write for sending on
SSL connection, next check for available
<pktSz> data is triggered after <txTo>
<connTo>
integer
0
Connection timeout in tenths
of seconds.
If the SSL connection to the
remote cannot be established
within this timeout period, an
error is raised.
Values:
0
:
the timeout is managed by TCP/IP
and SSL stack
10÷1200
:
timeout value

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English