Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 837 of 1039 2021-09-23
Not Subject to NDA
AT#SSLSECCFG2?
Read command reports the currently selected parameters in the format:
#SSLSECCFG2: <SSId>,<version>,<SNI>,< CustomCA >,< PreloadedCA >
AT#SSLSECCFG2=?
Test command reports the range of supported values for all the parameters.
See the following examples:
•
Set 1st and 2nd certificates of AT#SSLSECDATA and 3rd certificate
from AT#SSLSECCA
AT#SSLSECCFG =1,4,0,3,4
OK
•
Set 2nd, 3rd and 4th certificates of AT#SSLSECDATA and NO
cartificate from AT#SSLSECCA
AT#SSLSECCFG =1,4,0,14,0
OK

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English